The Pearl I2C Digital Temperature and Humidity Sensor Installation Diagram Here are Different I2C Terminal Block Locations on the Various Modules Once wired you would have to map sensor to the Module Board its wired to (for example let say the I2C ...
The Pearl Soil Moisture Sensor would be wired to your 5 Input Module in the following way: The White Wire of Temperature Probe would go to 3V on bottom of Module The Red Wire would go to the (+) of the Input you are going to use for the Temp Probe ...
the Pearl Modbus Advance Digital Integrated Sensor Module (Temperature/Humidity/C02) Installation Diagram Here are Different Com 1 & Power Locations on the Various Modules For mounting, simply use the zip tie to hang the Sensor. This is the most ...
the Pearl Modbus Digital Temperature and Humidity Sensor Installation Diagram Here are Different Com 1 & Power Locations on the Various Modules once you have installed your sensor here is a video (attachment) on how to Scan Temp & Hum Board and how ...
The Pearl Analog Temp Probe Sensor would be wired to your 5 Input Module in the following way: The Red Wire of Temperature Probe would go to 3V on bottom of Module the White Wire would go to the (+) of the Input you are going to use for the Temp ...
The Pearl Solar Light Sensor is a 12vdc Sensor that would be wired to your 5 Input Module in the following way: The Red Wire of Rain Sensor goes to (+) 12vdc The (-) of 12vdc Power Supply Wire goes into (-) of the Input you are going to use for Solar ...
This Weather Station was specifically designed to work with your PEARL Environmental Controller and features a Wind Speed indicator, Wind Direction Indicator, Visible Light Sensor, Rain Sensor, Outdoor Temperature Sensor, and an integrated wiring ...
If your Pearl system has an analog input module, then you can measure voltages from 0-10V. These voltages can be displayed locally on the LCD or on the cloud dashboard. Data can be captured and data logged for offline analysis. However, AUX control ...