PEARL - How do I use the Pearl to measure voltages?
PEARL - How do I use the Pearl to measure voltages?
If your Pearl system has an analog input module, then you can measure voltages from 0-10V. These voltages can be displayed locally on the LCD or on the cloud dashboard. Data can be captured and data logged for offline analysis. However, AUX control statements can also be written take appropriate actions in real-time.
While we prefer the reliability of a hard Ethernet connection for the harsh growing environment, we realize that there are installation challenges at some locations where this is not feasible. Here's an example of how to connect the Pearl to the ...
The Pearl has many features to help give you the growing advantage. The images below give an overview of the main components that the Pearl™ has to offer. The Pearl is a modular system that has many units that can be tied together to make a large ...
The Pearl has a unique feature where you can remote desktop into the actual controller via the cloud connection. This is useful for verifying local operations, customer support and training, and documentation.
The Input Multiplier option is for calibrating the outside light sensor or a CO2 sensor, if you have one. The Raw Value is the actual reading from the sensor. The Factor for the light sensor is the multiplier adjustment. Use the UP or DOWN keys to ...
Setup Inputs is where the user defines which sensors the Pearl™ will use, a process also known as sensor mapping. The screen above shows the typical sensor mapping for each sensor. If there is no particular sensor used, then leave the setting as None ...