iGrow 800 - Anenometer Stand Alone Installation

Please View the following Method in Installing the Stand Alone Anemometer to the 100 Series Controller.

 

Attached to this Article is a Anemometer Manual, and here is a video link on installing and mapping the Anemometer to the controller.

 

 

• Related Articles

• iGrow 800 - Rain Sensor Stand Alone Installation

  Please View the following Method in Installing the Stand Alone Rain Sensor to the iGrow 400/800 Controller. Attached to this Article is a Rain Sensor Manual, and here is a video link on installing and mapping the Rain Sensor to the controller.

• 1000 Series Rain Sensor Stand Alone Wiring and Installation

  Here is information for wiring up your Rain Sensor to the iGrow1000 Series Controller View the following link before installing, attached is information as well. Rain Sensor Dip Switch Setting Information

• 1000 Series Anemometer Installation

  Please View the following Method in Installing the Stand Alone Anemometer to the 1000 Series Controller. Attached to this Article is a Anemometer Manual, and here is a video link on installing and mapping the Anemometer to the controller. iGrow 1400 ...

• Before and After iGrow 800 Installation - Testimonial

  John Becker from Hart's Nursery, gives his testimonial on the before and after installation of the iGrow 800.

• iGrow 1400 - Communications - Network Wire Installation

  THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ Whether you need to setup multiple zones, add expansion units, or both, creating a network for the iGrow1400 ’s is simple. ...