Please View the following Method in Installing the Stand Alone Anemometer to the 1000 Series Controller.
Attached to this Article is a Anemometer Manual, and here is a video link on installing and mapping the Anemometer to the controller.
1000 Series Anemometer Installation
Related Articles
iGrow 800 - Anenometer Stand Alone Installation
Please View the following Method in Installing the Stand Alone Anemometer to the 100 Series Controller. Attached to this Article is a Anemometer Manual, and here is a video link on installing and mapping the Anemometer to the controller.Link Conn Installation Links
Here are a few links to assist you with your LinkConn 1000 installation process, attached is a manual. LinkComm 1000 download http://file.link4corp.com/software-download/LinkConn_1000_v3.6.2.0.zip Driver for USB to Serial Cable ...1000 Series Quantum Light Sensor Installation
Link4's Quantum Light Sensor limits the light measurement to the 400 to 700 nanometer band where photosynthesis takes place (PAR). The sensor heads are potted solid with no internal air space making them waterproof and suitable for use in all climate ...1000 Series Solar Light Sensor Installation
The Solar Light Sensor offers an accurate, yet cost effective tool to measure solar energy. With a universal mounting bracket and 50ft of cable, this light sensor can be placed inside or outside your greenhouse for: the sensor can be used for the ...1000 Series Rain Sensor Stand Alone Wiring and Installation
Here is information for wiring up your Rain Sensor to the iGrow1000 Series Controller View the following link before installing, attached is information as well. Rain Sensor Dip Switch Setting Information