Before and After iGrow 800 Installation - Testimonial

• Related Articles

• iGrow 1400 - Communications - Network Wire Installation

  THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ Whether you need to setup multiple zones, add expansion units, or both, creating a network for the iGrow1400 ’s is simple. ...

• iGrow 800 - Rain Sensor Stand Alone Installation

  Please View the following Method in Installing the Stand Alone Rain Sensor to the iGrow 400/800 Controller. Attached to this Article is a Rain Sensor Manual, and here is a video link on installing and mapping the Rain Sensor to the controller.

• Link Conn Installation Links

  Here are a few links to assist you with your LinkConn 1000 installation process, attached is a manual. LinkComm 1000 download http://file.link4corp.com/software-download/LinkConn_1000_v3.6.2.0.zip Driver for USB to Serial Cable ...

• Service and Support Testimonial

  John Becker from Hart's Nursery gives his testimonial on Link4's service and support.

• 1000 Series Anemometer Installation

  Please View the following Method in Installing the Stand Alone Anemometer to the 1000 Series Controller. Attached to this Article is a Anemometer Manual, and here is a video link on installing and mapping the Anemometer to the controller. iGrow 1400 ...