1000 Series Aspirated Indoor Digital Air Temp & Hum Sensor Inst.
The 1000 Series Aspirated Indoor Air Temperature and Humidity sensor provides powered aspiration for indoor monitoring of humidity and temperature. Pulling air thru the radiation shield and exhausting it out thru bottom, the 12 VDC power is supplied for both the fan and transmitters. The transmitter power is internally filtered from any fan motor noise that might affect the transmitter signal
To install the sensor please view the following diagrams to assist you:
you can also integrate quick swap junction boxes. If you are using extremely high Humidity levels or Humidity Tunnels, we recommend rotating and swapping out the sensor, which will allow for your saturated sensors to air dry.
Related Articles
iGrow 800 - Aspirated Indoor Digital Air Temp & Hum Sensor Inst.
The 100 Series Aspirated Indoor Air Temperature and Humidity sensor provides powered aspiration for indoor monitoring of humidity and temperature. Pulling air thru the radiation shield and exhausting it out thru bottom, the 12 VDC power is supplied ...1000 Series Outdoor Digital Air Temp & Hum Sensor Installation
Instead of a weather station, you may simply be mounting an outdoor digital air temperature sensor. The Air Temperature/Humidity sensor is within a radiation shield to ensure accurate air temperature readings in direct sunlight. The sensor includes a ...1000 Series Indoor Digital Air Temp & Hum Sensor Installation
The Air Temperature/Humidity sensor is within a radiation shield to ensure accurate air temperature readings in direct sunlight. The sensor includes a 50-foot sensor cable. Normally you will want to hang the sensor near the crop level close to the ...iGrow 800 - Indoor Digital Air Temp & Hum Sensor Installation
The Air Temperature/Humidity sensor is within a radiation shield to ensure accurate air temperature readings in direct sunlight. The sensor includes a 50-foot sensor cable. Normally you will want to hang the sensor near the crop level close to the ...Troubleshooting Missing Humidity and Temperature Readings on iGrow 800 (DIGITAL INDOOR TEMP/HUM SENSOR) v2.1
Why controller not showing a humidity reading (---%)and missing temperature reading (--.-F) on the display? There are two main ways your iGrow 800 controller could help you identify problems with your Indoor Temperature & Humidity Sensor. SENSOR ...