1000 Series Outdoor Digital Air Temp & Hum Sensor Installation
Instead of a weather station, you may simply be mounting an outdoor digital air temperature sensor.
The Air Temperature/Humidity sensor is within a radiation shield to ensure accurate air temperature readings in direct sunlight. The sensor includes a 50-foot sensor cable. Normally you will want to hang the sensor in a optimal location to obtain an outside temperature reading. It is important to keep the sensor away from irrigation emitters, unit heaters, etc. that will effect the accuracy of the sensor
NOTE: 1600 & 1800 READ OUT HUMIDITY, 1200 & 1400 DO NOT READ OUT HUMIDITY
Related Articles
1000 Series Indoor Digital Air Temp & Hum Sensor Installation
The Air Temperature/Humidity sensor is within a radiation shield to ensure accurate air temperature readings in direct sunlight. The sensor includes a 50-foot sensor cable. Normally you will want to hang the sensor near the crop level close to the ...iGrow 800 - Indoor Digital Air Temp & Hum Sensor Installation
The Air Temperature/Humidity sensor is within a radiation shield to ensure accurate air temperature readings in direct sunlight. The sensor includes a 50-foot sensor cable. Normally you will want to hang the sensor near the crop level close to the ...1000 Series Aspirated Indoor Digital Air Temp & Hum Sensor Inst.
The 1000 Series Aspirated Indoor Air Temperature and Humidity sensor provides powered aspiration for indoor monitoring of humidity and temperature. Pulling air thru the radiation shield and exhausting it out thru bottom, the 12 VDC power is supplied ...iGrow 800 - Aspirated Indoor Digital Air Temp & Hum Sensor Inst.
The 100 Series Aspirated Indoor Air Temperature and Humidity sensor provides powered aspiration for indoor monitoring of humidity and temperature. Pulling air thru the radiation shield and exhausting it out thru bottom, the 12 VDC power is supplied ...PEARL - Modbus Digital Temperature & Humidity Sensor Installation
the Pearl Modbus Digital Temperature and Humidity Sensor Installation Diagram Here are Different Com 1 & Power Locations on the Various Modules once you have installed your sensor here is a video (attachment) on how to Scan Temp & Hum Board and how ...