iGrow 800 - Indoor Digital Air Temp & Hum Sensor Installation
The Air Temperature/Humidity sensor is within a radiation shield to ensure accurate air temperature readings in direct sunlight. The sensor includes a 50-foot sensor cable. Normally you will want to hang the sensor near the crop level close to the center of the controlled environment. It is important to keep the sensor away from irrigation emitters, unit heaters, etc. that will effect the accuracy of the sensor.
Once Sensor is installed, you want to map the Sensor to be viewable from the Home Screen.
Related Articles
1000 Series Indoor Digital Air Temp & Hum Sensor Installation
The Air Temperature/Humidity sensor is within a radiation shield to ensure accurate air temperature readings in direct sunlight. The sensor includes a 50-foot sensor cable. Normally you will want to hang the sensor near the crop level close to the ...iGrow 800 - Aspirated Indoor Digital Air Temp & Hum Sensor Inst.
The 100 Series Aspirated Indoor Air Temperature and Humidity sensor provides powered aspiration for indoor monitoring of humidity and temperature. Pulling air thru the radiation shield and exhausting it out thru bottom, the 12 VDC power is supplied ...1000 Series Outdoor Digital Air Temp & Hum Sensor Installation
Instead of a weather station, you may simply be mounting an outdoor digital air temperature sensor. The Air Temperature/Humidity sensor is within a radiation shield to ensure accurate air temperature readings in direct sunlight. The sensor includes a ...1000 Series Aspirated Indoor Digital Air Temp & Hum Sensor Inst.
The 1000 Series Aspirated Indoor Air Temperature and Humidity sensor provides powered aspiration for indoor monitoring of humidity and temperature. Pulling air thru the radiation shield and exhausting it out thru bottom, the 12 VDC power is supplied ...***** iGrow Sensor Info, Issues and Troubleshooting
iGrow 100 series Sensor Issues Outdoor/Indoor Temp/Hum Sensor Troubleshooting Temperature sensor not registering. Check sensor connection wires on the controller to make sure there tight and securely fastened. Check connections inside junction box ...