Support iGrow 1400
iGrow 1400 - Analog Temp Probe Troubleshooting
THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ If your Analog Probe is displaying wrong readings, spiking up and down or not reading at all its time to take steps in ...
iGrow 1400 - Digital Temp and Humidity Sensor Troubleshooting
THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ If your Digital Temperature and Humidity Sensor is displaying wrong readings, spiking up and down or not reading at all its time ...
iGrow 1400 - Checking the controllers Step Down Voltage
THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ With The iGrow 1400 the controller needs 12vdc voltage to power the unit. the Controller has a Voltage Regulator which is needed ...
iGrow1400 - Issues Due To Lightning
THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ If your Site has been affected by Lightning, you may be experiencing some of the following symptoms: Controller Screens not ...
iGrow1400 - Power Issues - No Power LED
THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ If your iGrow 1400 has no power, and the Power LED is not lit up and is Out on the back of the board, we need to take the ...