Ridder Motor - Setting Low Voltage Mechanical Limits

Ridder Motor - Setting Low Voltage Mechanical Limits

for 3 wire and 5 wire iDrive to Ridder motor installations you will need to set the Low Voltage Mechanical Limits.

here are some video links to assist you in doing this process.

Ridder Motors I - Overview & Wiring a Ridder Motor


Ridder Motors II - Setting Mechanical Limits


Ridder Corp Training Video 1 Setting Mechanical Limit Switches



    • Related Articles

    • Ridder Single Phase 5 Wire 120/208/230VAC to iDrive - 970-0015-XXM

      Here is the Diagram for wiring the Ridder Single Phase 5 Wire to iDrive - 970-0015-XXM As well as Link4 YouTube Links to assist you establishing connectivity between the devices. Ridder Motors I - Overview & Wiring a Ridder Motor Ridder Motors II - ...

    • Ridder Single Phase 3 Wire 120/208/230VAC to iDrive - 970-0013-XXM

      Here is the Diagram for wiring the Ridder Single Phase 3 Wire to iDrive - 970-0013-XXM As well as Link4 YouTube Links to assist you establishing connectivity between the devices. Ridder Motors I - Overview & Wiring a Ridder Motor Ridder Motors II - ...

    • Ridder Tube Motor Wiring and Installation Information

      The Ridder Tube Motor has Built In Thermal Protection and built in Adjustable Limits All you need to control the Tube Motor an iDrive150 or a pair of Interlocking Contactors

    • iDrive Troubleshooting

      iDrive (* 1 iDrive per motor*) The iGROW is just dry switching contacts that the iDrive receives. Master into a Slave On the J2 PCB #3 &#2 (to 24VAC transformer) remove and INDEPENDENTLY cap off. Slave - Make into a Slave J1 on circut board (9 - 10 ...

    • iDrive - 970-0013-XXM Single Phase 3 wire

      Attached is wiring information associated with the model number you provided 970-0013-xxM If you’re attaching the iDrive to a Ridder Motor, we do have videos on how to set the Limit Switching Ridder Motors I - Overview & Wiring a Ridder Motor Ridder ...