Related Articles
iDrive Troubleshooting
iDrive (* 1 iDrive per motor*) The iGROW is just dry switching contacts that the iDrive receives. Master into a Slave On the J2 PCB #3  (to 24VAC transformer) remove and INDEPENDENTLY cap off. Slave - Make into a Slave J1 on circut board (9 - 10 ...
iDrive 150 DCP
Attached is the Drawing for iDrive 150 DCP
iDrive - Linking to 1200/1400/1600/1800 Series Enviormental Controller
Before you Link Your iDrive Motor Controller to the 1000 Series Controller You must make sure that the iDrive Manual Switch Opens and Closes your Vent/Shade Curtain/Louver without any problems, and if limits switches are involved that they are ...
iDrive - 970-0013-XXM Single Phase 3 wire
Attached is wiring information associated with the model number you provided 970-0013-xxM If you’re attaching the iDrive to a Ridder Motor, we do have videos on how to set the Limit Switching Ridder Motors I - Overview & Wiring a Ridder Motor Ridder ...
DeGier Single Phase 4 Wire 120VAC to iDrive 970-1214-xxM
Attached is Motor controller diagram for De Gier Motors 120VAC single phase. Here is the Diagram for wiring the Degier Single Phase 4 Wire to iDrive - 970-1214-XXM As well as Link4 YouTube Links to assist you establishing connectivity between the ...