Link Conn Installation Links

 

 

Here are a few links to assist you with your LinkConn 1000 installation process, attached is a manual.

LinkComm 1000 download

http://file.link4corp.com/software-download/LinkConn_1000_v3.6.2.0.zip

Driver for USB to Serial Cable

http://www.ftdichip.com/FTDrivers.html

This link will show you how to install the driver from device manager

http://www.sevenforums.com/tutorials/97061-driver-install-device-manager.html

• Related Articles

• Ridder Tube Motor Wiring and Installation Information

  The Ridder Tube Motor has Built In Thermal Protection and built in Adjustable Limits All you need to control the Tube Motor an iDrive150 or a pair of Interlocking Contactors

• 1000 Series Anemometer Installation

  Please View the following Method in Installing the Stand Alone Anemometer to the 1000 Series Controller. Attached to this Article is a Anemometer Manual, and here is a video link on installing and mapping the Anemometer to the controller. iGrow 1400 ...

• iGrow 800 - Anenometer Stand Alone Installation

  Please View the following Method in Installing the Stand Alone Anemometer to the 100 Series Controller. Attached to this Article is a Anemometer Manual, and here is a video link on installing and mapping the Anemometer to the controller.

• iGrow 800 - Rain Sensor Stand Alone Installation

  Please View the following Method in Installing the Stand Alone Rain Sensor to the iGrow 400/800 Controller. Attached to this Article is a Rain Sensor Manual, and here is a video link on installing and mapping the Rain Sensor to the controller.

• LinkConn 100 Software Installation Overview

  LinkConn 100 Software Hardware Architecture To create this type of Topology Layout for your Green House Controller Before you install LinkConn 100 on your Controller Network, you will need Communication Modules on your controllers. If you have more ...