iPonic using Trigger Logic
With the iPonic controller, you can use additional trigger devices to buffer high current loads to the iPonic controller.
Related Articles
iPonic 614 Manual
THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ Here are a couple of video links to get to iPonic Training Videos iPonic Essential Training Playlist: ...iPonic 15 Amp Max Understanding
THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ The iPonic Max Amp Capacity is 15Amps. Please utilize additional devices to assist in not exceeding the 15 Amp Limit. Do not ...iPonic Light Issues & Troubleshooting
THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ iPonic Light Issues Lights are not turning on: Check the Controllers Time on home screen and make sure its correct. Make sure ...iPonic 624 Understanding
THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ Here are a few starter videos to get you understanding the layered programing of the iPonic Controller. iPonic 624 Overview & ...iPonic 614 using Outputs 7 & 8
THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ The iPonic 614 has two (outputs 7 and 8) relays that are provided as dry contacts, i.e. “switch closures. If an output is ...