Wireless Accesss for the 100 series controller

Wireless Accesss for the 100 series controller

To establish communications between your iGrow800 series controllers to you PC you have 3 options:
·         You can “Hard Wire” the links
·         You can use “Wireless Radios” in which you would have to have 2 wireless radios to make this operational
·         You can use “Internet” with a “Wireless Setup” using a PC at greenhouse site, and PC at the office viewing the site REMOTELY with TeamViewer or WebEx.

    • Related Articles

    • iDrive - Linking to 1200/1400/1600/1800 Series Enviormental Controller

      Before you Link Your iDrive Motor Controller to the 1000 Series Controller You must make sure that the iDrive Manual Switch Opens and Closes your Vent/Shade Curtain/Louver without any problems, and if limits switches are involved that they are ...

    • iGrow 1800 - iDoser Nutrient Controller Overview

      The iDoser represents the latest in nutrient control technology. It interfaces the iGrow 1800 for local programming and control and consists of up to eight injectors feeding a manifold where the nutrients and/or acid/base are injected into the water ...

    • Mounting the iPonic Controller

      THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ Click below to view how to properly mount the iPonic controller.

    • Changing controller time

      You don't want just to adjust the time directly. Make sure that the time zone is correct first. If your controller is connected to the internet, the time will sync automatically. Note: Some customers want DST to be automatic while others don't. The ...

    • 1000 Series Communication Issues

      If the SM can’t see Zone Master, it could be a: · Wiring · Programming · Chip Issue On the Comm Diag Screen on the Site Master, are Zone 2 & 3 Displaying 3’s on the 1st column, 3 represents successful communication within the network. Please get the ...