PEARL - Temperature Unit Changes Must Reflect Across Entire System

When the temperature unit is changed in the system (for example from Fahrenheit to Celsius), the update should be reflected consistently across all related components. This includes alarms, setpoints, configurations, graphs, and any other areas where temperature values are displayed or used for control.

 Kindly review and adjust your setpoints according to the selected unit.

• Related Articles

• System Setup - System Units

  With the Peal Controller you can set a variety of System Units to best suite your grow needs Temperature Choose either degrees Fahrenheit (ºF) or degrees Centigrade (ºC). Wind Speed Choose either miles per hour (mph) or kilometers per hour (km/h). ...

• Pearl Individual Module Overview

  The Pearl has many features to help give you the growing advantage. The images below give an overview of the main components that the Pearl™ has to offer. The Pearl is a modular system that has many units that can be tied together to make a large ...

• PEARL Control System User Manual V.1.17.284

  Attached is the updated Pearl manual.

• Pearl Control System Manual - V1.18.2 (May 2026)

  For detailed instructions and important information on the Pearl Control System, please refer to the attached manual. It contains everything you'll need to get started and use the control system effectively. Edit: Version 1.18.2 Manual Attached.

• What is the Pearl Protect?

  The Pearl Protect is a simple data (temperature and humidity) collection device. Its primary features are: Collect temperature and humidity data and store them on the cloud. Sends you alerts of possible dangerous condition for your crops. Plug and ...