System Setup - System Units

System Setup - System Units

With the Peal Controller you can set a variety of System Units to best suite your grow needs
Temperature Choose either degrees Fahrenheit (ºF) or degrees Centigrade (ºC).
Wind Speed Choose either miles per hour (mph) or kilometers per hour (km/h).
Light Choose either Watts/meter 2 or klux or uMol/s.

To set your System Units from Pearl Cloud Platform you would do the following:




To set your System Units from Pearl Controller you would do the following:



    • Related Articles

    • System Setup - Set Up Inputs

      Setup Inputs is where the user defines which sensors the Pearl™ will use, a process also known as sensor mapping. The screen above shows the typical sensor mapping for each sensor. If there is no particular sensor used, then leave the setting as None ...

    • Pearl Control System Manual

      For detailed instructions and important information on the Pearl Control System, please refer to the attached manual. It contains everything you'll need to get started and use the control system effectively. Edit: Version 1.17.18 Manual Attached.

    • iDoser - EC-pH Alarm Setup

      With your iDoser, you can set up EC/pH Alarms Now here is a video - iDoser Environmental Controller EC / ph Alarm Setup <br> To Program hit Enter/Menu->iDoser Programming->EC/pH Alarms In the first screen you will assign the tank for ...

    • PEARL Control System User Manual V.1.17.284

      Attached is the updated Pearl manual.

    • Basic initial setup for a Pearl Control System