System Setup - Setup Location - setting up sunrise and sunset control feature

The Pearl™ has an internal astronomical clock. By knowing the actual coordinates, sunrise and sunset times can be precisely calculated. Go to www.heavens-above.com to find coordinates for your precise location. If a negative longitude is given you are west, and if a negative latitude is given you are south.

To get to Setup Location you would do the following:

Note: Some parameters are only available to be viewed and edited from the cloud only. Please log into your account at c2.link4cloud.com to access these parameters..

To setup Locations from Pearl Cloud Platform

• Related Articles

• PEARL Control System User Manual V.1.17.284

  Attached is the updated Pearl manual.

• Pearl Control System Manual - V1.18.2 (May 2026)

  For detailed instructions and important information on the Pearl Control System, please refer to the attached manual. It contains everything you'll need to get started and use the control system effectively. Edit: Version 1.18.2 Manual Attached.

• Setpoint/Time Period Programming - Astro Adjust ( Sunrise - Sunset ) Understanding

  With the Pearl Controller you can have up to 8 setpoint Start Times within a 24 hour Period for Temperature and Humidity. To program your Setpoints settings on the Cloud you would do the following: To program your Setpoints settings on the Controller ...

• Pearl Individual Module Overview

  The Pearl has many features to help give you the growing advantage. The images below give an overview of the main components that the Pearl™ has to offer. The Pearl is a modular system that has many units that can be tied together to make a large ...

• System Setup - Set Up Inputs

  Setup Inputs is where the user defines which sensors the Pearl™ will use, a process also known as sensor mapping. The screen above shows the typical sensor mapping for each sensor. If there is no particular sensor used, then leave the setting as None ...