System Setup - Network

to view the network information for the controller on the network you would do the following:

• Related Articles

• Pearl Control System Manual - V1.18.2 (May 2026)

  For detailed instructions and important information on the Pearl Control System, please refer to the attached manual. It contains everything you'll need to get started and use the control system effectively. Edit: Version 1.18.2 Manual Attached.

• System Setup - System Units

  With the Peal Controller you can set a variety of System Units to best suite your grow needs Temperature Choose either degrees Fahrenheit (ºF) or degrees Centigrade (ºC). Wind Speed Choose either miles per hour (mph) or kilometers per hour (km/h). ...

• System Setup - Controller to Controller Communication

  The Pearl topology refers to various modes of the controllers. Controllers can be set to these modes: Gateway: The controller that is connected to the weather station. It will broadcast the weather station data to all the other controllers through ...

• System Setup - Fallback Settings

  If the user encounters a 3-minute Timeout Error, the system switches to a backup plan, which is called the Fallback Setting. In this, the system defaults to predefined settings for Heating or Cooling stages to maintain the desired temperature range ...

• System Setup - Digital Inputs

  The Pearl system has several modules that have digital inputs: 8 Relay Output Expansion Module - 8 digital inputs 4 Relay and 4 Analog Output Expansion Module - 4 digital inputs These modules have digital inputs which can be configured to detect a ...