Saving/Downloading Config Troubleshooting

Saving/Downloading Config Troubleshooting

SAVING/DOWNLOADING CONFIGURATION 

  • Insert USB stick into controller
  • OK> Save/Restore Config> Save Configuration
  • Enter the name of your file and press OK

You can now take the USB memory stick to a computer to retrieve your file.

    • Related Articles

    • Saving/Downloading Config

      SAVING/DOWNLOADING CONFIGURATION Insert USB stick into controller OK> Save/Restore Config> Save Configuration Enter the name of your file and press OK You can now take the USB memory stick to a computer to retrieve your file.

    • LinkConn Troubleshooting

      LINKCONN TROUBLESHOOTING Serial Port Error Do you have the COMM cable wired in on the RS232-2 Port or plugged in to DB9 Serial Port on face of controller? Go To Device Mgr Pull usb out and then plug in. The device list will close & expand | identify ...

    • iGrow 800 - Saving & Restoring Configurations

      The Save and Restore option lets you label and store your program in either the internal memory of the iGrow 100 Series controller or a USB drive (jump drive). You may have programs for different crops or for different seasons of the year. This will ...

    • iDrive Troubleshooting

      iDrive (* 1 iDrive per motor*) The iGROW is just dry switching contacts that the iDrive receives. Master into a Slave On the J2 PCB #3 &#2 (to 24VAC transformer) remove and INDEPENDENTLY cap off. Slave - Make into a Slave J1 on circut board (9 - 10 ...

    • iponic Communications Troubleshooting

      THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ Please view the following video link before you begin troubleshooting. iPonic Communication Troubleshooting