ON/OFF Equipment Programming

The Pearl supports On/Off devices with up to 6 heating and 6 cooling stages. Use 1 to turn equipment ON and 0 to turn it OFF.

Use the Right/Left keys to go from one entry to another.

Use the UP or Down keys to toggle the On/Off condition for a particular stage.

The Pearl Controller View

The Cloud View

• Related Articles

• Mixing Valves (Proportional) - Equipment Programming

  Note: This equipment type requires 2 consecutive channels 1&2, 3&4, 5&6, etc. The first channel (odd numbered) must be wired to OPEN the valve, and the other (even numbered) to CLOSE it. To program Mix Valve from Pearl Cloud Platform you would do the ...

• MZone (or Micro Zone) for ON/OFF Equipment Programming

  The Pearl Controller can be used to monitor and control independent heating or cooling “MicroZones”. What is a Micro-Zone? A Micro-Zone is a region or compartment within a greenhouse that has a different temperature setpoint. Typical uses for ...

• System Setup - Cooling / Heating Stages setup

  The Pearl Controller allows you to have up to 6 cooling and 6 heating stages. To get to location to setup your temp staging you would do the following: On this screen you will select the maximum number of cooling and heating stages that you intend to ...

• PEARL Control System User Manual V.1.17.284

  Attached is the updated Pearl manual.

• Pearl Control System Manual - V1.18.2 (May 2026)

  For detailed instructions and important information on the Pearl Control System, please refer to the attached manual. It contains everything you'll need to get started and use the control system effectively. Edit: Version 1.18.2 Manual Attached.