iPonic Power Issues - Flickering LIght LED or NO POWER at all
On the Door PCB is the POWER LED lit up or is it Flickering.
Please take the following steps to check why the controller is not distributing power the way it should
Check the Breaker
Check and make sure there are no loose wiring
Check and see if the blue relay is loose
Meter the Power Supply
NOTE: Make sure that the person doing the checking is qualified in taking Meter Measurements.
Please give our support a call with your findings so we can come up with a solution for this problem at hand
Related Articles
iPonic Light Issues & Troubleshooting
THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ iPonic Light Issues Lights are not turning on: Check the Controllers Time on home screen and make sure its correct. Make sure ...iGrow1400 - Power Issues - No Power LED
THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ If your iGrow 1400 has no power, and the Power LED is not lit up and is Out on the back of the board, we need to take the ...iPonic Light Issues Troubleshooting
THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ Please view the Video Link to assist you in Troubleshooting Your Light Issues. iPonic Light Troubleshooting Also here are a few ...iPonic Power Issues
THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ POWER ISSUE RESOLVE FOR IPONIC the iPonic Controller Max Amp Load Capacity is 15 Amps if you plan on running Hi Current draw ...iPonic Power Issues
THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ if your iPonic controller has no power at all, make sure the 15 Amp Circuit Breaker is not popped out. If the 15 Amp Breaker is ...