iPonic Light Issues Troubleshooting

iPonic Light Issues Troubleshooting

THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM.
Please view the Video Link to assist you in Troubleshooting Your Light Issues.
 
iPonic Light Troubleshooting
 

Also here are a few items to view as well
iPonic – LIGHT -  Issues
Iponic Light not responding to Programmed Setpoint Times.
They Turn on/or off when there not supposed to.
·                     CHECK CONTROLLER CLOCK AND MAKE SURE IT IS CORRECT.
·                     Make sure Light is set to AUTO
·                     Make sure Manual Toggle Switch on the backside is on AUTO
·                     Check day & Night Setpoints
·                     Ok>CurrentSetpoints>SetpointTimes>then set Day & Night START Times
·                     The light settings should be set to turn on with the day Setpoint period

    • Related Articles

    • iPonic Light Issues & Troubleshooting

      THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ iPonic Light Issues Lights are not turning on: Check the Controllers Time on home screen and make sure its correct. Make sure ...

    • **iPonic CO2 Issues

      THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ iPonic CO2 Issues Co2 Sensor Failure and Freezing Check Firmware Version is up to date CO2 Sensor Failing to Meet PPM Setpoint ...

    • iPonic 614 DISM Troubleshooting

      THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ Please view the sensor troubleshooting video and view these steps in resolving your sensor reading, mapping, error issues iPonic ...

    • iPonic - Comm Module Troubleshooting

      THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ iPonic COMM MODULE Issues COMM Module – When I plug it in, the controller powers on ok. However, when I plug in the ethernet ...

    • iPonic 624 CO2 issues

      THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ In order for us to get your CO2 working Correctly, Please view the following Video for CO2 programming and troubleshooting, and ...