iPonic Irrigation & Programming Equipment information

iPonic Irrigation & Programming Equipment information

THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM.

Iponic Irrigation (Cycle & Comprehensive)

For COMPREHENSIVE -    TIMED OVERRIDE    Once Daily or a Single Event Override.
2ND You might want a 1 time /daily comprehensive irrigation event where IRR pump runs steady for some Time period.
in addition to the slow, steady trickle of the regular irrigation cycle. A timed override can force any equipment on or off, starting at any time
you choose and for any period of time you choose. One programmed override per piece of equipment is allowed.
Menu->SystemSetup->1. Equipment Setup->2. Advanced->(Choose Equipment)->button 1 Timed Override->
·         Enable/Disable
·         Override to be ON or OFF
·         Start Time
·         Duration
·         Dairly or One Time
For CYCLE – Interval Watering’s throughout the day  -  ADVANCE IRRIGATION SETTINGS .     
OK->SystemSetup->EquipmentSetup->Advance->put cursor over channel  you want to be irrigation-OK->SetType Irrigation –OK->Irrigation(button#3-->
·         Device – Enable/Disable
·         Start Time
·         End Time
·         On Time
·         Off Time

Programming Equipment to the Low Voltage Outputs

By default you can program only the first 6 outputs for which outlets are provided. If you wire additional equipment to either of the last two relays (as described above) you will need to program this additional equipment into the controller. An advanced setting will allow you to choose any of the 8 outputs (including the unnamed relays) and set the type of the equipment the controller will recognize as being installed at that output.
OK->SystemSetup->EquipmentSetup->Advanced->Choose OUTPUT you wish to change (OK)->InitialSettings (button#3) ->SetType (button#1)
You will see a list of equipment ( 1 thru 7) and you want to highlight the type you would like for that specific OUTPUT and press OK this will change the existing type to the NEW type you have selected.  Evidence of your selection will be Parentheses ( ) around the equipment.  
2nd press BACK once to go to the Initial Settings (of channel Programming) and press SET NAME (button#3) to name the device on the OUTPUT.  HIT the BACK button until you are at the home screen.  If prompt to SAVE You want to save the changes.

    • Related Articles

    • iPonic Irrigation Programming Video!

      THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ Click the link below for additional information on irrigation programming for the iPonic 600 Series controllers.

    • iPonic Irrigation Information

      THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ Please view the following information to assist you in staggering your irrigation on the iPonic Controller

    • AUX controls programming

      The Pearl Control system has many standard, built-in equipment types. They are pre-programmed control equipment types making controlling your greenhouse or grow room operations easy. All you need to do is to select the appropriate equipment type, and ...

    • iPonic Cycling Fans & Other Equipment using the Irrigation Equipment Type

      THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ Please view this link for a more in-depth understanding iPonic irrigation programming

    • iGrow1400 - Cycle Irrigation Programming

      With the iGrow1400 you can Program Cycle Irrigation and have your Irrigation Valves Turn on and off within a specific time window. Here is a video, IGrow1400 programming Cycle Irrigation To program simply hit Enter/Menu -> Program Equipment -> Hit ...