THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ The following instructions will get you up and running with the Link 4 cloud account so that you can access your iPonic remotely ...
THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ Cloud Setup --- (IPONIC ONLY) With the Cloud, the user can see their controller with any web browsing device (pc/iPhone/Android) ...
While we prefer the reliability of a hard Ethernet connection for the harsh growing environment, we realize that there are installation challenges at some locations where this is not feasible. Here's an example of how to connect the Pearl to the ...
The Input Multiplier option is for calibrating the outside light sensor or a CO2 sensor, if you have one. The Raw Value is the actual reading from the sensor. The Factor for the light sensor is the multiplier adjustment. Use the UP or DOWN keys to ...
Setup Inputs is where the user defines which sensors the Pearl™ will use, a process also known as sensor mapping. The screen above shows the typical sensor mapping for each sensor. If there is no particular sensor used, then leave the setting as None ...