iPonic 624 Firmware Step by Step Process
THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM.
Before updating your Firmware we recommend saving your configuration first.
After you have saved configuration, simply download 614 firmware (you can do this from this article at bottom)
and simply follow the provided process.
After you have saved the configuration, download the 614 firmware (contact Support for the latest firmware) and follow the provided process.
Related Articles
iPonic 614 Firmware Step by Step Process
THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ Before updating your Firmware, we recommend saving your configuration first. After you have saved configuration, simply download ...iPonic 624 Understanding
THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ Here are a few starter videos to get you understanding the layered programing of the iPonic Controller. iPonic 624 Overview & ...iPonic 624 Manual
THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ Here are a couple of video links to get to iPonic 624 Training Videos. iPonic Essential Training ...iPonic 614 AC Wiring step by step
THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ In order for you to connect a split A/C unit to the iPonic, you MUST HAVE A LOW VOLTAGE INTERFACE & BUILT IN THERMOSTATIC ...iGrow 1400 - Updating Firmware Process
To upgrade your firmware on your iGrow 1400 controller, you would need to contact Link4 Sales or Support and pick up the following: 1000 Series Programming Cable Firmware USB to Serial Converter RFU Software. Once these items have been obtained, you ...