iGrow1400 ON/OFF Equipment Type Programming Video

iGrow1400 ON/OFF Equipment Type Programming Video

THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM.

https://link4controls.com/link4_controllers/

Click the link below for additional information on programming the iGrow 1400 On/Off equipment type.

 


    • Related Articles

    • iGrow1400 - ON/OFF Equipment Type Programming

      The iGrow 1400™ supports On/Off devices with up to 6 heating and 6 cooling stages. Here is video providing a step by step process in programming ON / OFF Equipment type devices. iGrow 1400 ON/OFF Equipment Type Programming To Program your On/Off ...
    • iGrow 800 - Programming C02

      With the iGrow 800, you can control C02 levels within your Greenhouse Environment You would need your firmware updated to at least 1.0.2.1, and a Digital Integrated Sensor Module Installed on the controller. Here is a video link for the iGrow 800 ...
    • iGrow 800 - Equipment Setup Overview Tutorial

      The iGrow 800 allows user to setup the equipment on the various channels, set their type, assign names, energy type, etc. For each of the outputs, the equipment’s name is displayed, as well as the current controlled state that it is in: AUTO – ...
    • iGrow 800 - Programming Expansion Outputs

      Once you have your expansion Board Hardware installed, your equipment operating successfully from toggle switches and your Dip switches addressing set on expansion board accordingly, it’s time to program the software portion of expansion boards. Here ...
    • iGrow 1400 - Scheduled Irrigation Programming

      With the iGrow1400 you can Program Scheduled Irrigation to turn the Irrigation channel on for a duration equal to OnTime at up to six start times per day. and have your Irrigation Valves Turn on and off within a specific time window. Here is a video ...