Please view the following videos in the order that there in, so you can program your controller with confidence, and also have an understanding of what Setpoints are for, Staging of your equipment in Temperature and Humidity Stages, as well as how to Program your equipment.
iGrow 400/800 - Sensor Setup
iGrow 400/800 – Setpoint Programming
iGrow 400/800 - Setting up your equipment for Temperature & Humidity Stages.
iGrow 400/800 - Setting up your equipment ON/OFF Devices
iGrow 400/800 - Curtain Programming
iGrow 400/800 - Equipment Setup (VENTS)
iGrow 400/800 Equipment Overriding Video
iGrow 400/800 Sensor Troubleshooting
iGrow 400/800 Save & Restore Configurations
When setting up 2 speed fans make sure that the low speed and the High speed are not on the same stage. They must not be on at the same time.
Please view the following videos in the order that there in, so you can program your controller with confidence, and also have an understanding of what Setpoints are for, Staging of your equipment in Temperature and Humidity Stages, as well as how to ...
Please view the following videos in the order that they're in, so you can troubleshoot your sensor fluctuating issues, as well as program your controller with confidence, You will develop an understanding on what Setpoints are for, Staging of your ...
Attached is the iGrow 1800 User Manual Also here is a list of video links to assist you in obtaining a General understanding of how to program the iDoser controller. iDoser Videos
iGrow 1400 Quick Start Guide BEFORE YOU PROGRAM Is the equipment the same per shop drawings? Make sure that the Manual Toggles Operate the Equipment (On/Off) Make sure you have Timed Your Motors (Vent/Curtain Shutter) Make sure Hardware Interlock and ...