iGrow 800 - Sensor Setup Tutorial

• Related Articles

• iGrow 800 - Curtain Programming Tutorial

  Curtains requires 2 consecutive output channels.(1&2, 3&4, 5&6, 7&8). The first channel (odd numbered) must be wired to Uncover/Open Curtain, and the other (even numbered) to Cover/Close Curtain. Click the link below for additional information on ...

• iGrow 800 - Relative Humidity Staging & Advance Settings Tutorial

  With the iGrow 800, you can control Relative Humidity within your Greenhouse Environment. Note: Relative Humidity staging overrides Temperature staging. Here is a video link that guides you through the control process. To get to your Humidity staging ...

• iGrow 800 - Vent Equipment Setup Tutorial

  Vents requires 2 consecutive output channels (1&2, 3&4, 5&6, 7&8). The first channel (odd numbered) must be wired to Open vent, and the other (even numbered) to CLOSE it. Click the below for a tutorial on vent setup for the iGrow 100 series. On ...

• iGrow 1800 - Setup and Calibrate Sensor Inputs

  Setup Inputs is where you tell your iGrow1800, what sensors you are using (this is also called sensor mapping). Here is a video on iGrow 1800 Setup and Calibrate Sensor Inputs Now to get to the Screen Now to Program Setup Unputs / Calibrate Inputs, ...

• System Setup - Input Multiplier

  The Input Multiplier option is for calibrating the outside light sensor or a CO2 sensor, if you have one. The Raw Value is the actual reading from the sensor. The Factor for the light sensor is the multiplier adjustment. Use the UP or DOWN keys to ...