The iGrow 800 Integrated Contactor Panel is a UL approved greenhouse contactor panel and an iGrow 800 controller, conveniently pre-mounted on the door for ease of installation. There's no need to mount two separate boxes with conduits in between. Pre-wiring between the controller and the high voltage contactors further reduces installation time.
Here is a Video Overview of the iGrow 800 Series Integrated Panel Overview
Once you have your Dedicated Circuit powering the panel, all you have to do is line and load your Equipment, Test the equipment's operation with manual dip switch on back of controller, and then its ready for programming.
Each Integrated Panel comes with a Contactor layout sheet as well as a Load Worksheet
Here some information to give you some assistance with your iGrow 800 Integrated panel wiring Here is a quick video Link on the iGrow 800 Series Integrated Panel Overview All of our contactors and Relays on our standard panels you would Line and Load ...
THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ The iPonic Controller can also be transformed into a Commercial Integrated Panel iPonic Integrated Panel Overview Here are a ...
iGrow 800 & 1200 : Integrated Panels What dictates the need of a panel? If you are controlling anything above 24V. If amperage is above 1 amp. If no…… Then you can connect it directly to the controller. If yes...... Then you need some kind of ...
THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ Click below for an overview on the iPonic 600 controller's front panel.
The iDoser represents the latest in nutrient control technology. It interfaces the iGrow 1800 for local programming and control and consists of up to eight injectors feeding a manifold where the nutrients and/or acid/base are injected into the water ...