What's real important on your Curtain programming are the times you input into the programming Make sure the open to close time is correct and imputed in the programming The Controller current time, and since you are using Sunrise and Sunset times that the location is correct.
You also want to make sure that the day mode and night mode times do not overlap For Example:
7:00am to 7:00pm - DAY MODE START END TIME 6:55am to 7:05pm - NIGHT MODE START END TIME
Please view the following videos in the order that there in, so you can program your controller with confidence, and also have an understanding of what Setpoints are for, Staging of your equipment in Temperature and Humidity Stages, as well as how to ...
Attached is the iGrow 1800 User Manual Also here is a list of video links to assist you in obtaining a General understanding of how to program the iGrow1800 controller.
The iDoser represents the latest in nutrient control technology. It interfaces the iGrow 1800 for local programming and control and consists of up to eight injectors feeding a manifold where the nutrients and/or acid/base are injected into the water ...
Curtains requires 2 consecutive output channels.(1&2, 3&4, 5&6, 7&8). The first channel (odd numbered) must be wired to Uncover/Open Curtain, and the other (even numbered) to Cover/Close Curtain. Click the link below for additional information on ...