iGrow 800 Configuration Setup

iGrow 800 Configuration Setup

The Configuration File .icf is a special file format that only the controller’s Logic can recognize.  This file is to be set aside for safekeeping for backup purposes just in case.
 
To restore this configuration, or to save new configurations that you may be using for testing purposes, you would do the following:
 
Insert USB stick into controller
 Press OK-> SystemSetup->SaveRestore->SaveRestoreConfig->SaveConfig(button 1)
A window will pop up with options - you want to save to USB-> then enter file name and press OK
You would follow same steps when you restore your configuration, but instead of Saving Configuration you would be restoring (button 2)
You can now take the USB memory stick to a computer to retrieve your file.

    • Related Articles

    • iGrow 800 - Sensor Setup Tutorial

      Please view the following video and necessary steps in setting up your sensors

    • iGrow 1400 System Setup - Part I video

      Click the link below for Part I of the iGrow 1400 System Setup video series.

    • iGrow 1800 - Setup and Calibrate Sensor Inputs

      Setup Inputs is where you tell your iGrow1800, what sensors you are using (this is also called sensor mapping). Here is a video on iGrow 1800 Setup and Calibrate Sensor Inputs Now to get to the Screen Now to Program Setup Unputs / Calibrate Inputs, ...

    • iGrow 800 - Equipment Setup Overview Tutorial

      The iGrow 800 allows user to setup the equipment on the various channels, set their type, assign names, energy type, etc. For each of the outputs, the equipment’s name is displayed, as well as the current controlled state that it is in: AUTO – ...

    • iGrow 800 - Vent Equipment Setup Tutorial

      Vents requires 2 consecutive output channels (1&2, 3&4, 5&6, 7&8). The first channel (odd numbered) must be wired to Open vent, and the other (even numbered) to CLOSE it. Click the below for a tutorial on vent setup for the iGrow 100 series. On ...