iGrow 800 Clock Issue

iGrow 800 Clock Issue

If you have Clock Issue, it means your firmware on your controller is outdated, and what you need to do an update.
First, save your existing settings (setpoints/equipment/stages) we would have to save your configurations first.
To save your configuration you would do the following:
Insert USB stick into controller
Press OK-> SystemSetup->SaveRestore->SaveRestoreConfig->SaveConfig(button 1)

A window will pop up with options - you want to save to USB-> then enter file name and press OK
You would follow same steps when you restore your configuration after Firmware Update but instead of saving you would be restoring (button 2)
Next you want to update your firmware.
1st create a folder on your desktop and name it PRG
2nd download the firmware attached to this article
3rd Insert the firmware file into the PRG folder and insert it into a THUMB DRIVE.
4th Insert the USB into the back of the controller and do the following
OK-> System Setup-> Advance->6.Begin Bootload (then you will see a couple of pop up screens) Default setting “NO” | Begin Bootload “Yes” | Ok to Confirm

    • Related Articles

    • iGrow 100 - Memory Corruption Issue

      MEMORY CORRUPTED 1st Format File System Process Menu->SystemSetup->6. Advanced-> More->button 3 for Clear Data->Format file system (button 2) This will remove all webserver files. 2nd Check AC out outlet (make sure its 110) 3rd Check DC from power ...

    • iGrow 800 Start Up Information

      Attached is an iGrow800 Manual, iDrive 300 Manual, wiring diagram for your Temperature & Humidity Senso

    • iGrow 800 Understanding Videos

      Please view the following videos in the order that there in, so you can program your controller with confidence, and also have an understanding of what Setpoints are for, Staging of your equipment in Temperature and Humidity Stages, as well as how to ...

    • iGrow 1400 Manual

      Attached, you will find the iGrow 1400 manual.

    • iGrow 800 - Programming an Alarm Tutorial

      With the iGrow 800 Controller, any one of the available 8 channels can be selected to be an alarm output. Click the link below for information on programming an alarm for an iGrow 800 controller. Set Temperature: lets you select the temp threshold ...