Please View the following Method in Installing the Stand Alone Anemometer to the 1000 Series Controller. Attached to this Article is a Anemometer Manual, and here is a video link on installing and mapping the Anemometer to the controller. iGrow 1400 ...
The iDoser represents the latest in nutrient control technology. It interfaces the iGrow 1800 for local programming and control and consists of up to eight injectors feeding a manifold where the nutrients and/or acid/base are injected into the water ...
Please take the following steps in troubleshooting your Temperature Probe. iGrow 100 Series Sensor Troubleshooting Temperature sensor is fluctuating or not registering at all Check sensor connection wires on the controller make sure there snug & ...
Please view the following videos in the order that they're in, so you can troubleshoot your sensor fluctuating issues, as well as program your controller with confidence, You will develop an understanding on what Setpoints are for, Staging of your ...
iGrow 100 series Sensor Issues Outdoor/Indoor Temp/Hum Sensor Troubleshooting Temperature sensor not registering. Check sensor connection wires on the controller to make sure there tight and securely fastened. Check connections inside junction box ...