iGrow 100 Series Irrigation

iGrow 100 Series Irrigation

In order to water multiple times with your iGrow800 controller, you would have to manipulate the Humidity Settings in order to achieve this Goal.
Please follow the steps in sequence to obtain multiple watering’s within a 24 hour period, and if you run into difficulties please feel free to call our Technical support.
 
1st Map InHUM Sensor to be Software
OK-.SystemSetup->SensorSetup->MapSensor (button#1)->InHum->Software
2nd Calibrate InHUM Sensor to 90% (so the controller sees the Current HUM to be 90%
OK->SystemSetup->SensorSetup->CalibrateSensor(button#2)->hit Next(button#2) till you highlight CAL Humidity – Enter 90% (this will display a 90% Humidity Reading on Home Screen)
3rd Set HUM Setpoints to be a range below 90% (example.. 60% humidify 80% dehumidify)
OK->Setpoints->HumiditySetpoint->Set-Day->SetDeHumidifySetpoint(button#6) and enter a percentage that is lower than 90% (example 80%)
This will engage your Dehumidification to be running all the time.
4th  Go To Advance Humidity Settings and set On & Off times to match your irrigation timing.
OK->SystemSetup->Advance->HumiditySettings(button#1)->
Set ON/OFF times Minutes & Seconds
5th  Go To Humidity Stages | under IRRIGATION have it to Force “Override On”  in DEHUM
OK->Stages->HumidityStages->scroll down to irrigation & navigate across to DEHUM and make the field OVERRIDE ON.
6th SET a TIMED OVERRIDE to shut the watering process off for a period until the next day.
OK->SystemSetup->EquipmentSetup->Irrigation->TimeOverride(button#1) and input a time in which you want your irrigation to be off.

    • Related Articles

    • iGrow 800 Understanding Videos

      Please view the following videos in the order that there in, so you can program your controller with confidence, and also have an understanding of what Setpoints are for, Staging of your equipment in Temperature and Humidity Stages, as well as how to ...

    • 1000 Series Soil Moisture Sensor Wiring & Installation

      Please view the following video in installing your Soil Moisture Sensor Grow 1400 Soil Trigger Irrigation The key is knowing both when and how much to water! Maintaining a healthy soil moisture and water balance is essential for producing high ...

    • iGrow 800 Relay Info and Wiring Examples

      Control Relays & Contactors Your iGrow Series 100™ has 4 or 8 output relays that are provided as dry contacts, i.e. switch closures. If an output is activated to ON, the switch is “closed” (shorted); and if it iis activated to OFF, the switch is ...

    • iGrow 800 Start Up Information

      Attached is an iGrow800 Manual, iDrive 300 Manual, wiring diagram for your Temperature & Humidity Senso

    • iGrow 1800 - iDoser Nutrient Controller Overview

      The iDoser represents the latest in nutrient control technology. It interfaces the iGrow 1800 for local programming and control and consists of up to eight injectors feeding a manifold where the nutrients and/or acid/base are injected into the water ...