iGrow 100 Series Communication Options
With your iGrow 100 Series Controllers you can view your controllers with Software, the Web Browser from you home Network, or the iGrow Cloud.
You would need a Communications module to establish.
Please view our Demo cloud to get an idea, of how your controller can talk to you from the other side of the planet. https://igrow.link4cloud.com/
Related Articles
iGrow1400 - Communication options
THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ With the iGrow 1000 Series Controller, you have a variety of communication options you can use to connect to your controller via ...
iGrow 800 CLOUD - Communication Time Out Troubleshooting
1000 Series Communication Issues
If the SM can’t see Zone Master, it could be a: · Wiring · Programming · Chip Issue On the Comm Diag Screen on the Site Master, are Zone 2 & 3 Displaying 3’s on the 1st column, 3 represents successful communication within the network. Please get the ...
iPonic 600 Series - Communication Module Install #1
THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ Click below for part 1 of the communication module installation series.
iGrow 800 Understanding Videos
Please view the following videos in the order that there in, so you can program your controller with confidence, and also have an understanding of what Setpoints are for, Staging of your equipment in Temperature and Humidity Stages, as well as how to ...