6-terminal block poly switch on the iDrive 300 Wiring diagram (single phase)

6-terminal block poly switch on the iDrive 300 Wiring diagram (single phase)

Attached is the drawing for the iDrive 300 field connection diagram for Motor Controller 970-0013-xxM, rated for 120/208/240 VAC, 50/60 Hz, single-phase.

    • Related Articles

    • iDrive - 970-0013-XXM Single Phase 3 wire

      Attached is wiring information associated with the model number you provided 970-0013-xxM If you’re attaching the iDrive to a Ridder Motor, we do have videos on how to set the Limit Switching Ridder Motors I - Overview & Wiring a Ridder Motor Ridder ...

    • LOCK Single Phase 120VAC Master Wiring diagram 970-1013-xxM

      Connecting iDrive to Lock Motor Information Run your Line In and Motor Out wiring as prescribed in the Link4 Shop Drawing. Regarding Limits you need to determine if it’s a single or three phase motor. Each requires a certain procedure in setting ...

    • LOCK Single Phase 240VAC Master Wiring diagram 970-1013-xxM

      Connecting iDrive to Lock Motor Information Run your Line In and Motor Out wiring as prescribed in the Link4 Shop Drawing. Regarding Limits you need to determine if it’s a single or three phase motor. Each requires a certain procedure in setting ...

    • iDrive Troubleshooting

      iDrive (* 1 iDrive per motor*) The iGROW is just dry switching contacts that the iDrive receives. Master into a Slave On the J2 PCB #3 &#2 (to 24VAC transformer) remove and INDEPENDENTLY cap off. Slave - Make into a Slave J1 on circut board (9 - 10 ...

    • DeGier Single Phase 4 Wire 230VAC to iDrive 970-2314-xxM

      Attached is Motor controller diagram for De Gier Motors 230VAC single phase. Here is the Diagram for wiring the Degier Single Phase 4 Wire to iDrive - 970-1214-XXM As well as Link4 YouTube Links to assist you establishing connectivity between the ...