iDoser LinkConn Manual Version 3.0

• Related Articles

• iDoser Manual and Training Videos

  Attached is the iGrow 1800 User Manual Also here is a list of video links to assist you in obtaining a General understanding of how to program the iDoser controller. iDoser Videos

• iGrow 1800 - iDoser Nutrient Controller Overview

  The iDoser represents the latest in nutrient control technology. It interfaces the iGrow 1800 for local programming and control and consists of up to eight injectors feeding a manifold where the nutrients and/or acid/base are injected into the water ...

• Hydroroot User Manual [V.1.1.3]

  Attached is the HYDROROOT User Manual firmaware version (1.1.3) for detailed guidance on installation, configuration, and operation.

• iDoser - Calibrating EC/pH Sensors

  With your iDoser, you can Calibrate your EC/pH Sensors as well as the built-in temp sensor of the EC probe. To Program, hit Enter/Menu-> iDoser Programming -> EC / pH Settings -> Calibrate Sensors -> Now the 1st option is which sensor you wish to ...

• LinkConn Troubleshooting

  LINKCONN TROUBLESHOOTING Serial Port Error Do you have the COMM cable wired in on the RS232-2 Port or plugged in to DB9 Serial Port on face of controller? Go To Device Mgr Pull usb out and then plug in. The device list will close & expand | identify ...