Hydroroot Firmware Update Guide using USB Stick [rev 1.1]
Save the firmware (bin) file to the USB stick.
For Hydroroot units only, save the Menu file to the USB stick along with the firmware file. The Hydroroot menu file should have “HydroRoot” and “Menu” in the file title. If you are updating a Pearl unit, skip this step.
Insert the USB stick in the upper left slot.
Navigate to Menu System- Press ENTER
Navigate to Firmware
Press ENTER to highlight
Press ENTER to enter Firmware Menu
Press ENTER to highlight Update
Use UP and DOWN buttons to highlight the desired Firmware version. In this example, it is 1.16.977. Once selected, press ENTER to start. The software will verify the content of the file.
With Yes highlighted, press ENTER
The upgrade will initiate. Do not power off. Once done, press ENTER.
After the Firmware has been updated and the controller is ON, wait for 1 minute, and the controller will automatically copy the menu file from the USB. Unit will reboot. Remove the USB drive.
The lower left corner is the new FW version.
Press the LEFT key if needed to navigate back to this screen from the HOME screen.
Related Articles
Pearl/Hydroroot Controller Firmware Update Guide using USB Stick
Save the firmware (bin) file to the USB stick. Insert the USB stick in the upper left slot. Navigate to Menu System- Press ENTER Navigate to Firmware Press ENTER to highlight Press ENTER to enter Firmware Menu Press ENTER to highlight Update Use UP ...HydroRoot 16 Installation Guide
The HydroRoot Irrigation Controller is designed for simple setup and reliable operation in greenhouses, indoor farms, and research facilities. To make installation easier, we've provided the HydroRoot 16 Installation User Guide in this article. It ...Updating the Digital Version of the Pearl Firmware Using a USB Stick
The Pearl firmware can be updated remotely using the cloud (OTA - over the air). However, there are installations where the internet connection is either non-existent or too unstable for a reliable update. The Pearl controller can also be updated ...HydroRoot Irrigation Controller Manual
The HydroRoot 16 ( PIRR-A0-16T1 ) represents the latest in automated irrigation management for greenhouses. It enables precise control and integration of multiple irrigation zones, giving growers flexibility to manage watering by schedule, misting ...Link Conn Installation Links
Here are a few links to assist you with your LinkConn 1000 installation process, attached is a manual. LinkComm 1000 download http://file.link4corp.com/software-download/LinkConn_1000_v3.6.2.0.zip Driver for USB to Serial Cable ...