How to remote into a controller (Using the RC tool)
How to remote into a controller (Using the RC tool)
The Pearl has a unique feature where you can remote desktop into the actual controller via the cloud connection. This is useful for verifying local operations, customer support and training, and documentation.
While we prefer the reliability of a hard Ethernet connection for the harsh growing environment, we realize that there are installation challenges at some locations where this is not feasible. Here's an example of how to connect the Pearl to the ...
The Pearl firmware can be updated remotely using the cloud (OTA - over the air). However, there are installations where the internet connection is either non-existent or too unstable for a reliable update. The Pearl controller can also be updated ...
If your Pearl system has an analog input module, then you can measure voltages from 0-10V. These voltages can be displayed locally on the LCD or on the cloud dashboard. Data can be captured and data logged for offline analysis. However, AUX control ...
Save the firmware (bin) file to the USB stick. Insert the USB stick in the upper left slot. Navigate to Menu System- Press ENTER Navigate to Firmware Press ENTER to highlight Press ENTER to enter Firmware Menu Press ENTER to highlight Update Use UP ...