Group programming

Group programming

For large sites where there are many similar zones, Link4's Pearl offers the ability for you to program a number of zones as a group.  This process saves a significant amount of time.  However, one must be careful is using this feature.  In advertent changes by the users could be unintentionally be replicated to many zones quickly.


    • Related Articles

    • AUX controls programming

      The Pearl Control system has many standard, built-in equipment types. They are pre-programmed control equipment types making controlling your greenhouse or grow room operations easy. All you need to do is to select the appropriate equipment type, and ...

    • Save and restore zone configuration on the cloud

      All controller settings can be saved for backup and be reused or restored at a later. This can be done both on the cloud (saved to your account) and locally (saved to your USB stick). This is how you save your Zone configurations on the cloud. ...

    • How to setup a WiFi adapter to connect the Pearl to the cloud via WiFi

      While we prefer the reliability of a hard Ethernet connection for the harsh growing environment, we realize that there are installation challenges at some locations where this is not feasible. Here's an example of how to connect the Pearl to the ...

    • How do I use the Pearl to measure voltages?

      If your Pearl system has an analog input module, then you can measure voltages from 0-10V. These voltages can be displayed locally on the LCD or on the cloud dashboard. Data can be captured and data logged for offline analysis. However, AUX control ...

    • Updating the Digital Version of the Pearl Firmware Using a USB Stick

      The Pearl firmware can be updated remotely using the cloud (OTA - over the air). However, there are installations where the internet connection is either non-existent or too unstable for a reliable update. The Pearl controller can also be updated ...