CO2 Equipment Programming

CO2 Equipment Programming

The Pearl™ can also be used to regulate the amount of CO 2 inside the greenhouse by controlling CO 2 pumps or injectors.
This mode is active between the Start and End times. 
Co2 programming has 2 Setpoints,
Setpoint 1:  Drives the C02 levels to a specific threshold regardless if your vents are wide open and the light bright and above a certain value
Setpoint 2:  is a conditional statement that allows you to force the level to a certain level if the outside light is above a set threshold and the temperature stage is greater than or equal to
a preset level. 

To program CO2 from Pearl Cloud Platform you would do the following:




To program CO2 from Pearl Controller you would do the following:











    • Related Articles

    • iGrow1400 - Equipment Override Programming

      The iGrow 1400 Equipment Override programming feature (timed override) allows you to manually override your greenhouse equipment for specified periods of time, either once or daily. Here is a video link to provide a more in depth understanding - the ...

    • Curtain - Equipment Programming

      Note: This equipment type requires 2 consecutive channels 1&2, 3&4, 5&6, etc. The first channel (odd numbered) must be wired to OPEN the valve, and the other (even numbered) to CLOSE it. Shade Control In programming your curtain for shading you will ...

    • AUX controls programming

      The Pearl Control system has many standard, built-in equipment types. They are pre-programmed control equipment types making controlling your greenhouse or grow room operations easy. All you need to do is to select the appropriate equipment type, and ...

    • iGrow 1400 Equipment Programming Video

      THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ Click the link below for additional information on programming equipment for the iGrow 1400.

    • iPonic Irrigation & Programming Equipment information

      THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ Iponic Irrigation (Cycle & Comprehensive) For COMPREHENSIVE - TIMED OVERRIDE Once Daily or a Single Event Override. 2ND You ...