Changing controller time

Changing controller time

You don't want just to adjust the time directly.  Make sure that the time zone is correct first.  If your controller is connected to the internet, the time will sync automatically.  
Note: Some customers want DST to be automatic while others don't.  The DST parameter is set to off automatically and has to be adjusted manually.


    • Related Articles

    • iGrow 1800 - iDoser Nutrient Controller Overview

      The iDoser represents the latest in nutrient control technology. It interfaces the iGrow 1800 for local programming and control and consists of up to eight injectors feeding a manifold where the nutrients and/or acid/base are injected into the water ...

    • What is the Pearl Dimmable Light Controller?

      The Pearl Dual-Zone Dimmable Light Controller is a precision lighting control unit designed for spaces requiring independent control of two lighting zones, with automatic adjustments based on background light and environmental conditions. Core ...

    • How to Save and Restore Controller’s Configuration

      The Configuration Menu is your safety net for saving, restoring, and resetting your controller’s setup. The primary and most reliable method is saving and restoring through the Cloud, but you can also use USB or the controller’s built-in flash memory ...

    • Time Setpoints - iPonic 614

      THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE PEARL CONTROL SYSTEM. https://link4controls.com/link4_controllers/ Click below for additional information on time setpoints.

    • iDrive - Linking to 1200/1400/1600/1800 Series Enviormental Controller

      Before you Link Your iDrive Motor Controller to the 1000 Series Controller You must make sure that the iDrive Manual Switch Opens and Closes your Vent/Shade Curtain/Louver without any problems, and if limits switches are involved that they are ...